System Requirements for the SONY NSR

The hardware required in order to use this recorder are as follows.

• Sony Network cameras
Contact your dealer for details about compatible Sony network cameras.
• Monitor1)
• USB keyboard2)
• USB mouse3)
• USB remote controller4)
• Network switch
• 1000Base-T/100Base-TX/10Base-T cable
• USB memory device5)

1) This unit supports HDMI-compatible devices and computer displays that support RGB input.
The following resolutions can be specified.
- Full High-Definition (1,920 × 1,080)
- WUXGA (1,920 × 1,200)
- Full Wide XGA (1,360 × 768)
- UXGA (1,600 × 1,200)
- SXGA (1,280 × 1,024)
- XGA (1,024 × 768)
2) Use a USB keyboard with a cable. However, keys other than the standard may not function. Wireless or infrared USB keyboards may also not function properly.
3) Use a USB mouse with a cable. However, three-button or wheel mice may not function properly. Wireless or infrared USB mice may also not function properly.
4) You can use a remote controller to control pan, tilt, and zoom operations for cameras. - This unit supports IP Desktop USB controllers from CH Products. Other remote controllers are not supported.
5) Required when backing up system information such as logs. - This unit supports standard USB 2.0 Mass Storage devices. Depending on the type of USB 2.0 Mass Storage device, however, errors may occur when writing data to the device. If errors occur when writing data, use a USB memory device of a different type.